Winbond Hard Disk Controller Driver



If the hard disk in your Laptop is not detected by Lazesoft boot disk, you need to load disk/RAID drivers from the Lazesoft boot disk in order for WinPE to recognize your hard disk.

  1. Winbond Hard Disk Controller Driver Adapter
  2. Winbond Hard Disk Controller Drivers

Winbond's W25X and W25Q SpiFlash ® Multi-I/O Memories feature the popular Serial Peripheral Interface (SPI), densities from 512K-bit to 512M-bit, small erasable sectors and the industry's highest performance. The W25X family supports Dual-SPI effectively doubling standard SPI clock rates. In some scenarios, you can also use the software mentioned above to get a better insight into the hard drive. If the driver monitor gives you a red alert by displaying poor health and smart warnings, you immediately need to clone the disk as the hard drive may become useless in the future. Not only this, try reconstructing the virtual Raid to.

Winbond Hard Disk Controller Driver

For example, some Laptops use Intel Rapid Storage Technology to improve SATA hard disk performance. If the Intel RST is set as AHCI or RAID mode, you need to load the Intel Rapid Storage Technology (Intel RST) RAID/AHCI driver. If your Laptop is 32 bit, please create a 32 bit Lazesoft boot disk and load the 32 bit driver. If your Laptop is 64 bit, please create a 64 bit Lazesoft boot disk and load the 64 bit driver.

Winbond Hard Disk Controller Driver Adapter

For your computer, you need to load the 64 bit driver for Intel Rapid Storage Technology (Intel RST) RAID driver.

Here is the download page from Intel:

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23496&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)&lang=eng

The following are the steps to load Intel RST drivers for a Windows 8/8.1 64 Laptop:

Winbond Hard Disk Controller Drivers

  1. Launch Lazesoft Recovery Suite.
  2. Click <Burn CD/USB disk> on the home page of Lazesoft Recovery Suite.
  3. Select the target computer version as Windows 8 64 bit on the home page of Lazesoft Media Builder.
  4. Follow the wizard to create a bootable USB disk.
  5. Download the drive package, f6flpy-x64.zip from the download link from Intel, https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23496&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)&lang=eng
  6. Decompress the drive package to open a folder.
  7. Copy the folder to the new burned USB boot flash drive.
  8. Reboot your target computer from the new burned USB boot flash drive.
  9. After the Lazesoft Recovery Suite is launched, click the <Load drivers> button on the home page.
  10. Load the <iaAHCIC.inf>, and then load <iaStorAC.inf> from the USB disk.